H910 Plus with Activated Carbon Flat Folding Mask is a particulate protective mask and remove the\u00a0undesirable odor*. It has a high degree of protection, larger chamber space, better air permeability, comfort\u00a0and applicability, to provide users with a safe and comfortable particle protection solutions<\/p>\n
– Filter efficiency exceed 95%<\/p>\n
– Contain activated carbon layer, thus effectively removing the undesirable odor<\/p>\n
– Hidden nose clip is provided with no metal exposure, higher bending resistance than metallic material.\u00a0 Nose pad is made with sealing material of high fitness and softness, which can reduce the nasaloppressive feeling, and brings your better and more comfortable experience while using.\u00a0Large internal space enhances more air circulation, provides user comfortable<\/p>\n
– The elastic welded strap avoid risk of leakage, provide better comfort for long hours of uses<\/p>\n
Material Composition:<\/strong><\/p>\n Use Instructions:<\/strong> 2. Before use, the wearer must first be trained by the employer in the correct use of the respirator in\u00a0accordance with applicable safety and health standards.<\/p>\n 3. Discard the respirator and replace with a new one if: 4. Leave the contaminated area if dizziness, irritation or other distress occurs.<\/p>\n Use Limitation:<\/strong><\/p>\n 1. DO NOT use the respirator or enter or stay in a contaminated area under the following circumstances: Contaminants or their concentrations are unknown or immediately dangerous to life or health: 2. DO NOT modify or misuse the respirator.<\/p>\n 3. DO NOT use the respirator with beards or other facial hair that interferes with direct contact between Wearing Instruction:<\/strong><\/p>\n 1. Hold the masks of nose clip side, with nose clip up and headband naturally hanging down;<\/p>\n 2. Put on the mask and place the chin in the mask to keep close to the face. Pull the lower end of the headband till to the back of the head, under the ears;<\/p>\n 3. Then pull the upper end of headband to the back of the\u00a0head, above the ears;<\/p>\n 4. Press the nose clip to adjust with index finger and middle\u00a0finger of both hands until it snaps close to the bridge of\u00a0the nose;<\/p>\n 5. Conduct air tightness test.<\/p>\n Air tightness test:<\/strong><\/p>\n 1. Close your fingers and place your hand on the mask. Do not move the mask;<\/p>\n 2. Inhale hard and hold your breath for a few seconds. You will find obvious inward collapse of the mask;<\/p>\n 3. Exhale hard and hold your breath for a few seconds. You will find a clear expansion of the mask;<\/p>\n 4. If the leak is detected, recheck again following the 1-3 step until the requirements of step 2 and 3\u00a0are met at the same time;<\/p>\n 5. Only the respirator, which completely passes test of step1-3, can meet the air tightness requirements of\u00a0the protective mask<\/p>\n","protected":false},"excerpt":{"rendered":"\n\n
\n \u00a0Part<\/strong><\/td>\n \u00a0Material<\/strong><\/td>\n \u00a0Advantage<\/strong><\/td>\n<\/tr>\n \n \u00a0Outer layer<\/td>\n \u00a0Polypropylene<\/td>\n \u00a0Primary Filter, intercept the large size particles<\/td>\n<\/tr>\n \n \u00a0Filter layer 1<\/td>\n \u00a0Polypropylene<\/td>\n \u00a0Absorb medium-sized particles and block fine particles<\/td>\n<\/tr>\n \n \u00a0Filter layer 2<\/td>\n \u00a0Activated carbon cotton cloth<\/td>\n \u00a0Remove the undesirable odor<\/td>\n<\/tr>\n \n \u00a0Inner Layer<\/td>\n \u00a0Polyester<\/td>\n \u00a0Fit to skin, enhance comfort<\/td>\n<\/tr>\n \n \u00a0Nose Pad<\/td>\n \u00a0Polyester<\/td>\n \u00a0High adhesion, reduce the leakage risk, reduce the constriction to nose, more comfortable<\/td>\n<\/tr>\n \n \u00a0Ear Strap<\/td>\n \u00a0Polyester with no Latex<\/td>\n \u00a0Hardly cause skin irritation, safer than rubber<\/td>\n<\/tr>\n \n \u00a0Nose clip<\/td>\n \u00a0 Hidden-type high strength\u00a0plastic composite material<\/td>\n \u00a0No metal exposure, bending times is 1.5 times of\u00a0metallic one<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
\n1. Failure to follow all instructions and limitations concerning the use of respirator and\/or failure to wear\u00a0the respirator for the whole duration of exposure to contaminants can seriously reduce the performance\u00a0characteristics of the respirator and lead to illness, injury, or death.<\/p>\n
\n– Excessive clogging of the respirator causes breathing difficulty.
\n– The respirator becomes damaged.<\/p>\n
\n– Atmosphere contains less than 19.5% oxygen
\n– Atmosphere contains oil aerosols
\n– For protection against gases or vapors<\/p>\n
\n– Concentrations or contaminants exceed maximum use concentrations in applicable government
\nregulations or 10 times the PEL (Permissible Exposure Limit), whichever is lower
\n– For sandblasting, paint-spray operations, asbestos<\/p>\n
\nthe face and the edge of the respirator, or any other conditions that may prevent a good face-seal.<\/p>\n\n